PR1: 24V buffer battery for emergency power supply Convenience: operation during power failures guaranteed by the PR1 buffer batteries housed inside the control unit, which can be connected using a convenient plug-in connector. Mhouse won’t let you down even during black-outs: ten opening and closing manoeuvres guaranteed.

M4 rack zinc coated 22 x 22 x 1000mm (To be welded on the gate)

M4 rack with spacers & screws zinc coated 22 x 22 x 1000mm (spacers are welded onto the gate and the rack then screwed onto these spacers)

PT100: pair of 945mm high posts, with two pre-assembled photocells on each, adjustable height

Pre-wired 2 outputs variable code receiver with 433.92MHz transmission frequency and
self-learning function Easy installation: the colour-coded terminals enable quick, error-proof connections.
This universal receiver can also be used with pre-existing automations.
Two outputs for control of as many devices, which can be freely linked to any key on the transmitter

Pair of wall-mounted autosynchronized photocells

PT50: pair of 485mm high posts, with a pre-assembled photocell on each, adjustable height

Two-position key-operated selector switch

Adjustable flashing light with integrated aerial for 433.92MHz frequency

TX4 433.92MHz 4 button variable code transmitters

For SL1 only. CR100 Nylon gear rack with steel core, four 1-metre sections.